PDA

View Full Version : engineering a s2 with a 13bt


RUN011
04-08-2009, 08:00 PM
Well i have had my rx7 sitting around for a number of years in a defected state and i have finally started to tinker with it again, so i was wondering whats involved with engineering a s2 rx7 with a 13bt?
i know it will need to run a std computer and the like but what else needs to be done, ie brakes and god knows what else...
its pretty modified at the moment so i know there will be a bit of work converting it back to a standardish spec but i miss driving it and it looks awfully sad with the 2 inches of dust it has collected since being off the road.. any advice would be appreciated.
cheers

FLEX
04-08-2009, 08:04 PM
shoot corey a PM, he got his S2 through regency with a 13BT with a few goodies. His username is yelloS2Rx7

yelloS2Rx7
05-08-2009, 05:15 PM
contact regency ask for a statement of requirements to modify your vehicle
fill out the paperwork
car must be standard/regency spec
height/noise/roadworthy/seatbelts/demister/water washer etc
car can run 13BT as it came out from mazda in S4-5
everything standard computer/injectors/bov emissions everything....
have fun!!!!!!!!!!!!

FLEX
05-08-2009, 09:55 PM
contact regency ask for a statement of requirements to modify your vehicle
fill out the paperwork
car must be standard/regency spec
height/noise/roadworthy/seatbelts/demister/water washer etc
car can run 13BT as it came out from mazda in S4-5
everything standard computer/injectors/bov emissions everything....
have fun!!!!!!!!!!!!

there you go, straight from someone with first hand experience. Goodluck! you'll need it unfortunately

BrapBug
22-08-2009, 04:39 PM
im looking at buyig a s2 rolling that had a 12a in it, but i want to put a 13b in it. Would i have to have the car inspected? Am only asking as it is a bridgeport (and would like to keep everything as legal as possilbe)! Otherwise i will look at a 12a bridgey or wait and hope that i can get a shell that had a 13b in it! any help would be great thanx

yelloS2Rx7
23-08-2009, 10:10 AM
if ya want it legal, u need to apply to regency for approval, ask for a statement of requirements, when your car complys with the req they stipulate and would go thru regency normal roadworthy inspection youre done!!!